video
Flat Wave Reactor

Flat Wave Reactor

A flat wave reactor refers to an electronic device used in a rectified DC circuit. The number of pulses in the rectifier circuit is always finite, and there is always ripple in the output straightening voltage. This ripple is often harmful and needs to be suppressed by a flat-wave reactor.

Chat Now
Product Introduction
Introduction

 

An electrical device used in a rectified DC circuit is called a flat wave reactor. There is always a ripple in the output straightening voltage and a finite number of pulses in the rectifier circuit. Since this ripple is frequently dangerous, a flat-wave reactor is required to reduce it. On the DC side of the HVDC converter station, the DC filter and the flat wave reactor combine to generate the DC harmonic filter loop. One of the key components of the high-voltage DC converter station is a flat wave reactor, which is typically linked in series between the DC output end of each pole converter and the DC line.

product-850-1009

 

Scope of application

In order to optimize the output tributary waveform, suppress the ripple pulsation component after rectification, make the current after rectification continuous, and guarantee the regular functioning of DC equipment, the rectifier circuit uses a flat wave reactor.
Electric locomotives, frequency converters, DC-powered thyristor electrical drives, and DC transmission converter stations

product-850-883

 

Features

 

  • The iron core is made of high-quality silicon steel sheet, and the core column is divided into uniform small pieces by multiple air gaps, the air gap adopts high temperature and high strength adhesive to closely bond each small section of the core column with the upper and lower yoke, and the end face of the iron core adopts high-quality anti-rust paint spraying process, which solves the problem of rust on the surface of the reactor core. Noise and vibration are greatly reduced during operation.
  • The reactors are all vacuum-impregnated and cured by high-temperature hot baking. The coil has good insulation properties, high overall mechanical strength, and good moisture-proof performance.
  • The coil adopts an F and H class insulation system, which greatly improves the reliability of long-term operation.
  • Low-temperature rise, small loss, low cost, high comprehensive utilization rate.
  • Small size, lightweight, small footprint, easy to install.

product-850-1342

 

Hot Tags: flat wave reactor, China flat wave reactor manufacturers, suppliers, factory, high quality current limiting reactor, electric reactors for electric bicycles, non linear current limiting reactor, electric reactors for electric trikes, high reliability current limiting reactor, lead time of current limiting reactor

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag